How To Set Up My Wii Remote

How to Set Up a Second Controller for a Nintendo Wii

By Matt Skaggs

i Junko Kimura/Getty Images News/Getty Images

The Nintendo Wii has unique "Wii Remote Controllers" for yous to apply when interacting with the arrangement. You betoken these controllers at the screen to make selections similar to a remote control, but y'all also use them to play games and select options, similar to navigating menus with a conventional game controller. To ready a second Wii Remote Controller you accept two choices: you tin can employ the "Standard Mode," an indefinite connection that the remote and Wii "think" after powering off, or you can use "One Time Way," which is a temporary connection that the Wii and the controller "forget" when turned off.

Standard Fashion

Step 1

Turn on your Nintendo Wii. You tin do this past pressing the power button on the front of the unit of measurement or by pressing the power push button on the first Wii Remote Controller that is already set upwardly with the system.

Step 2

Access the battery cover on the back of the Wii Remote Controller. If you have a sleeve on the control, you'll need to remove that. If you apply a Wii MotionPlus, you'll need to remove the sleeve by sliding the lock switch down and so pressing in on the release buttons to pull it out. If you have both on your controller, you'll need to unlock the MotionPlus attachment before trying to have the jacket off.

Step 3

Remove the battery cover by pressing on the release tab and and so pulling information technology up and off of the remote.

Step 4

Press the cherry "SYNC" button just beneath the batteries' location. You practise non demand to remove the batteries admission the button. The LEDs on the remote will brainstorm blinking.

Footstep 5

Open the cover to the SD menu slot on the Wii and printing the red "SYNC" button.

Step vi

Wait for the LEDs to stop blinking on the Wii Remote Controller. The controller is now gear up up and ready for employ.

1 Time Mode

Stride one

Plow on the Wii. You tin can plow it on by pressing the ability push button on the front of the console itself, or you tin can turn information technology on by pressing the power push button on the Wii Remote Controller that is already activated for the organisation.

Step 2

Press the "Abode" push on the Wii Remote Controller that is already synced with the organization. This is the bluish push button almost the middle of the remote with an icon of a business firm. This will bring up the pick screen. You can do this inside a game you're playing as well as from the showtime upwards menu.

Step 3

Choose "Wii Remote Settings" to admission additional options.

Step 4

Select the "Reconnect" button.

Step five

Press and hold the "i" and "2" buttons at the same time on the Wii Remote Controller that you desire to connect in One Time Mode. The LEDs on the remote should begin blinking.

Step 6

Wait for the LEDs to end blinking. The 2d remote controller is now connected.

References

Warnings

Author Bio